McKee's 37 Xtreme Iron Remover

McKee's 37 Xtreme Iron Remover


Iron contamination is almost inevitable on most vehicles, even when brand new.  Contamination can be caused by rail dust, brake dust, and other environmental factors.  McKee’s 37 Xtreme Iron Remover is a quality, ready-to-use iron remover, and is pH balanced for safe use on all exterior surfaces.

Add To Cart

The Dallas Auto Salon Exterior Detail Process

Note: This all-encompassing detail process is meant to provide an overview of the detailing approach used by Dallas Auto Salon.  This is not THE way to detail a vehicle, it is simply ONE way to do so.  Each vehicle has different needs and the steps to appropriately address the needs of a vehicle depend on many factors which are reviewed prior to starting any work. The detail process is outlined below with the selected product highlighted to indicate it's stage of the process.

- Clean Wheels
- Clean Tires & Wheel Wells
- Treat heavily soiled areas with APC
- Wash exterior
- Dry exterior surfaces
- De-iron exterior surfaces
- Clay bar exterior surfaces
- Paint correction as needed
- Apply coating to exterior surfaces
- Apply sealant to exterior surfaces
- Apply carnauba wax to exterior surfaces
- Remove with spray wax    
- Dress tires/wheel wells/exterior plastics
- Clean windows inside & out

Use Instructions

Complete regular wash of vehicle using wash method of choice.  After wash and dry, inspect the exterior surfaces of the vehicle by touch.  Ideally painted surfaces will be smooth as glass after wash process.  If surfaces are rough, sticky, or have visible contaminants (brake dust, rail dust, tree sap, etc.)  decontamination is necessary.  Spray Iron Remover to exterior of vehicle.  Paint should be cool and dry.  Wait 2-3 minutes for product to activate, there will likely be a visible change in color as the product reacts with contaminants.  After 2-3 minutes, rinse vehicle and dry.  For best results, use clay bar on exterior surfaces.